Microsyst
fresh menu leftfresh menu right
Microsyst photo
Bulgarian (Български)English (United Kingdom)
Example of Section Blog layout (FAQ section)
PDF Print E-mail

Oil & Gas Industry

The oil/gas industry has several critical requirements to the process in order to prevent moisture, corrosion, inefficient fuel usage and not least in order to meet official safety regulations. Especially differential pressure is a very important factor measuring gas flow through pipelines, pressure at compressor stations, but also deviations in the temperature flow have great impact on the performance and costs.

 

The reasons why we calibrate within the oil & gas industry are:

  • To meet ISO900;
  • To obtain traceability;
  • To meet official regulations;
  • To optimize quality;
  • To save energy;
  • To achieve optimum machine performance;
  • To minimize reprocessing costs;
  • To reduce unexpected repairs;
  • To reduce waste of raw materials;
  • To reduce pollution;
 
PDF Print E-mail

Food Industry

Food and beverages must be produced and stored at certain temperatures to maintain their quality. Also an even pressure flow through the process pipelines are important to avoid blockage in the pipes. During transportation to distribution points and the consumers, products need to be contained under certain specified conditions.

 

The reasons why we calibrate within the food industry are:

  • To meet ISO9000;
  • To obtain traceability;
  • To meet official regulations;
  • To optimize quality;
  • To save energy;
  • To achieve optimum machine performance;
  • To minimize reprocessing costs;
  • To reduce unexpected repairs;
  • To reduce waste of raw materials;
  • To reduce pollution;
 
PDF Print E-mail

Power & Energy

In order to achieve optimum machine performance, improve efficiency of plants and at the same time save energy it is important to detect all deviations from desired plant operation. This is for example done measuring temperatures in eg. boilers, motors, feed water, generators or measuring pressure in oil bearing turbine pumps, high voltagestransformers etc.

 

The reasons why we calibrate within the power energy industry are:

  • To meet ISO9000;
  • To obtain traceability;
  • To meet official regulations;
  • To optimize quality;
  • To save energy;
  • To achieve optimum machine performance;
  • To minimize reprocessing costs;
  • To reduce unexpected repair;
  • To reduce waste of raw materials;
  • To reduce pollution;
 
PDF Print E-mail

 

Industries


Based on the demands for better quality control, increased production efficiency and reduced energy consumption in a wide variety of industrial processes, temperature and pressure must be accurately controlled. Data from the applied measuring equipment however does not always provide the required accuracy to the process.

Before the measuring equipment can accurately control the process, the equipment itself must first be measured accurately. This is important since data from temperature and pressure instruments directly affects the quality of the products produced, the efficiency of production processes, and the quality of the products delivered to the customer.
Marine Industry                         Food Industry                        Oil & Gas Industry
Power & Energy Industry
 


Newsflash

The Microsyst Calibration Laboratory Reg. № 14-lk expanded the range of accreditation Order № 81/12.03.2018 (BDS ISO/IEC 17025:2006)

Navigation

Home Section Blog
Banner



Microsyst Calibration Laboratory - Plovdiv, Bulgaria - Tel: +359 32 642 519, Fax: +359 32 640 446 - E-mail: office@microsyst.net.